Can Display
Can Display
CAN Displays

CDC1430

The best choice as a stand-alone controller for smaller work machines. Also optimally suited as a master controller and HMI for more complex systems. Adaptations with an integrated IMU sensor, USB connection, and touchscreen are also available.

"*" indicates required fields

Contact us for more information

Consent*
This field is for validation purposes and should be left unchanged.

  • Can Display

    • 38 configurable I/O lines
    • 2 x CAN-FD capable bus interfaces
    • 4,3” optically bonded screen with 480 x 272 resolution
    • Integrated wireless connectivity
    • 1 x 44 pin sealed connector
    • 125 x 125 x 42 mm

  • Technical Information

    • 9-32 VDC (designed for 12 VDC and 24 VDC) operating voltage range (protected against reverse polarity)
    • Maximum simultaneous load: 20 A
    • -30 °C…+70 °C operating temperature range
    • -30 °C…+85 °C storage temperature range
    • 4,3 inches TFT -panel color display, resolution 480 x 272 pixels
    • 4 buttons keyboard
    • ARM Cortex M7 400 MHz CPU
    • 1 MB SRAM
    • 2 MB internal flash memory
    • 32 MB external flash memory
    • Real time clock (RTC)
    • BLE, on-board antenna
    • Main dimensions: 125 mm x 125 mm x 42 mm
    • 2 x CAN Interface 2.0B, ISO 11898
    • SuperSeal TE Connectivity 44 pin
    • Ingress Protection IP67 with closed connector

    I/O Interface

    • Total of 38 configurable IO-lines and two CAN Interfaces.
    • The I/O interface is protected against short to GND and to supply voltage.
    • Separate supply for outputs and electronics, max 10 A fuse.
    • Configurable reference voltage: +3,3 V / + 5 V / +10 V / +12V, max 150 mA.

  • 10.6.2025 © Exertus Oy/Ltd CDC1430 Technical Information.
    Exertus reserves the rights to change product details without prior notice.

Similar products